By default, SKULabs sends shipment notification to your sales channel when a shipping label is printed or a manual shipment is added to an order in SKULabs.
If you find an order that has not received tracking information from SKULabs we recommend reading in order:
1. Why was tracking information not sent to my store?
2. How to identify orders that failed to notify the store
How it works
When you buy a label or add a manual shipment, SKULabs sends the carrier, service and tracking number for that shipment to the sales channel and asks the channel to mark the order shipped. Some channels accept a full fulfillment record with line items and quantities; others only accept a single tracking number for the whole order. What your customer sees depends on what the channel accepts, not on what SKULabs sends.
Two behaviors vary by channel, and both are covered in the table below:
Partial shipments — whether the channel can be told that only part of the order shipped. On channels that do not support this, SKULabs waits until the order is fully shipped before notifying, so the channel never shows a half-shipped state.
Multiple tracking numbers — whether every box gets its tracking number sent, or only the most recent one.
Choosing when notifications are sent
Each store has a Shipment notification setting under Store settings > Shipping:
Complete shipments only — notify the channel once the whole order has shipped. This is the safe default for every channel.
Partial and complete orders — notify on every shipment. Only use this on a channel that supports partial shipments (see table). On a channel that does not, SKULabs skips the partial notification and shows a warning on the order.
Non-dropshipped orders — skip notification for any order containing a dropshipped item.
Never — do not notify the channel at all.
Release orders upon scan — notification is handled by the release barcode workflow instead.
Channel support
Sales channel | Partial shipment support | Multiple tracking numbers |
Shopify | Yes | Yes, all tracking numbers sent |
TikTok Shop | Yes | Yes, all tracking numbers sent |
Amazon | No | Yes — one package per box |
WooCommerce | Yes | Yes, all tracking numbers sent as an order note |
Custom / Remote Store | Yes | Yes, all tracking numbers sent to your endpoint |
Magento 1 | Yes | Yes, all tracking numbers sent |
Magento 2 | Yes | No — most recent only |
Wix | Yes | No — most recent only |
ByDesign | Yes | No — most recent only |
Shift4Shop (REST) | Yes | No — most recent only |
BigCommerce | No | No — most recent only |
eBay | No | No — most recent only |
Etsy | No | No — most recent only |
Walmart | No | No — most recent only |
Shift4Shop (legacy) | No | No — most recent only |
Spree | No | No — most recent only |
Zendesk Sell | No | No — most recent only |
QuickBooks | Not applicable | Not applicable |
Square | Not supported | Not supported |
PrestaShop | Not supported | Not supported |
Manual stores | Not supported | Not supported |
If an order ships in more than one box and the channel is marked most recent only, the channel receives the tracking number of the newest shipment. The earlier tracking numbers stay in SKULabs on the order's Shipments tab, but they are not sent to the channel and are not shown to your customer there.
The same applies when a channel does not support partial shipments and you ship an order in two rounds: the first round is not sent to the channel at all, and when the second round completes the order, the channel receives the tracking number from that second shipment. The first tracking number is not sent.
If your customer needs every tracking number, send them from the channel side, or contact SKULabs support so we can look at your workflow.
Channel notes
BigCommerce
BigCommerce does not accept partial shipments from SKULabs. If you ship an order in two rounds, the first round is skipped with a warning on the order and nothing reaches BigCommerce. When the order is completed, SKULabs creates one BigCommerce shipment covering everything BigCommerce still shows as unshipped, using the most recent tracking number, and sets the order to Shipped. Earlier tracking numbers are not sent. Set this store to Complete shipments only to avoid the warning.
BigCommerce also only accepts carriers from its own list. If your carrier is not on it, SKULabs sends the shipment without a carrier name and BigCommerce falls back to a generic tracking link. Royal Mail is sent as a tracking link in the shipment comments, because BigCommerce no longer accepts Royal Mail as a carrier.
WooCommerce
WooCommerce has no built-in fulfillment record, so SKULabs adds an order note in the form Shipped with SKULabs: carrier - service - tracking number, including any additional tracking numbers, and updates the order status. Partial shipments set the status to Partially shipped; if your WooCommerce installation does not have that status registered, SKULabs falls back to Processing.
Magento 2
SKULabs creates the shipment in Magento with the carrier and tracking number. Quantities are capped at what Magento still shows as left to ship on each line (ordered, minus shipped, refunded and canceled). Magento requires a tracking number on every shipment, so a shipment without one is not sent.
If you resend a shipment that Magento already has, SKULabs does not send it again and shows a notice on the order instead.
Capturing payment when the order ships
Note: this setting is only available on next.skulabs.com for now. It comes to every SKULabs account in an upcoming release.
If your store authorizes payment at checkout and captures it when the order is invoiced, turn on Create invoice and capture payment when marking as shipped in the Magento 2 store's settings, under Access credentials & integration settings. It is off by default. When it is on, SKULabs invoices the whole Magento order and captures the payment right before it sends the order's first shipment:
The first shipment captures the full order amount, including items that ship later in other boxes, ship from a supplier (dropship), or aren't linked to a SKULabs item. Later shipments ship without a new invoice.
Nothing is invoiced when the order is already fully invoiced, for example when it was paid at checkout.
If Magento already shows the order as shipped but not invoiced, the next shipment notification captures what is left without shipping again, and a notice on the order says so.
If the capture fails (card declined, authorization expired, or a payment gateway that allows only one capture), the shipment is not sent and the order is tagged as a failed shipment notification. Fix the payment in Magento, then resend the shipment notification.
No invoice email is sent to your customer.
Before you turn it on, make sure the Magento user SKULabs connects with can ship (Orders > Actions > Ship), invoice (Orders > Actions > Invoice) and view shipments (Operations > Shipments). If the store's Shipment notification setting is Non-dropshipped orders, orders with a dropshipped item are never notified, so they are never invoiced either.
Good to know:
The payment is captured with the order's first notification. If the store notifies Complete shipments only, it is captured when the whole order has shipped.
Voiding a label after its shipment notification doesn't undo the shipment or refund the payment in Magento. If an item can't ship or the order is canceled, refund it in Magento with a credit memo.
Every payment method on the order is invoiced, including offline ones such as check or money order, which Magento then shows as paid.
An invoice created in Magento admin with Not Capture counts as invoiced, so SKULabs ships without capturing. Capture that invoice in Magento.
Troubleshooting
Magento shows nothing left to ship on this order: the items were already shipped, refunded or canceled in Magento.
None of the items in this shipment are on the Magento order: link these items to the Magento products on the order, then resend the shipment notification.
Magento 2 requires a tracking number on every shipment: add the tracking number to the shipment, then resend the shipment notification. Nothing was sent to Magento and no payment was captured.
Walmart
Walmart requires a carrier from its supported list. If your carrier is not on that list, SKULabs sends the shipment as Other with a tracking link, which can affect your seller rating — contact support if you see this. If an item's SKU does not match what Walmart has on the order, that line is skipped and a warning is shown on the order.
Wix
Wix only accepts FedEx, UPS, USPS, DHL and Canada Post, or a tracking link. If neither is available, the fulfillment is created without tracking information.
Shift4Shop
Shift4Shop stores on the REST connection support partial shipments, but Shift4Shop keeps a single shipment record per order, so each notification replaces the previous tracking number rather than adding to it. Legacy Shift4Shop connections do not support partial shipments.
Amazon, eBay, Magento 1, Shopify and Shift4Shop
Notifications for these channels are queued and sent by a background process rather than immediately. It is normal for the order to show as shipped in SKULabs a few minutes before the channel updates.
QuickBooks
QuickBooks has no shipment record to update, so no tracking is sent. The order is still marked shipped in SKULabs.
